Below you will find a selection of the new beverage equipment we have to offer. If you don't see what you're looking for, please contact us for further selections at (709) 738-6007 or (709) 728-1489 {cell}.
Name : Spar SP-200 Planetary Mixer
Photo : 
Description : Motor: 1/2 h.p., grease packed ball bearing, air-cooled, 110/60/1 (50Hz available)
Controls: The following controls are standard on all Spar Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, and thermal overload protection
Cord and Plug: 6 ft. flexible three wire cord and ground prong.
Transmission: Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by direct linkage to the motor drive shaft. This design yields high-torque mixing power.
Speeds: (Agitator rpm), (Hub rpm’s)
1. Low Speed 106, 59
2. Intermediate Speed 196, 110
3. High Speed 358, 201
Bowls and Agitators: Standard equipment includes a 20Qt. high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
Attachments: Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.
Finish: Top (transmission cover): metallic bronze epoxy enamel
Bottom: metallic gray epoxy enamel
Shipping Information:
N.W. - 176lbs - (80kgs)
G.W. - 220lbs - (100kgs)
Carton Size: Depth 24in.(60cm) Width 23in.(58cm) Height 37.8in.(96cm)
Cartons are affixed to an undersized skid (pallet), the weight and diminsions of this skid are not included above and may vary from shipment to shipment.
For additional information on this item (as well as this item in different series models), please contact George or Mary at (709)728-1489 or email nfldfood@nl.rogers.com
Name : Omcan Potato Peeler
Photo : 
Description : Our peelers combine economy and efficiency in preparing vegetables. Simple and safe to use, as well as easy to clean! All are constructed of stainless steel. The peeling cycle is swift with minimum product waste. The electrical components are protected inside a sealed box. They are equipped with a safety sensor, which stops the cycle when the door is opened.
Model EC71 - SPECIFICATIONS
HORSEPOWER - .4 HP
CAPACITY - 11 LBS.
ELECTRICAL - 110V/60HZ/1PH
WEIGHT - 53 LBS.
DIMENSIONS (LWH) - 26" x 13.5" x 16"
For additional information on this item (as well as this item in different series models), please contact George or Mary at (709) 728-1489 or email nfldfood@nl.rogers.com
Name : Omcan Meat Grinder (Model ERT12)
Photo : 
Description : MODEL ERT12
Light-duty counter style meat grinder. It is manufactured from stainless steel and equipped with a stainless steel feed pan. Ideally designed for butcher shops, food stores, and restaurants.
HP - .7HP
RPM ON GRINDER HEAD - 200 RPM
ON MOTOR RPM - 1400 RPM
AMPERAGE - 3
ELECTRICAL - 110V/60/1
WEIGHT - 60 LBS.
For additional information on this item (as well as this related item in different models), please contact George or Mary at (709) 728-1489 or email nfldfood@nl.rogers.com
Name : Star Manufacturing Grill-Max Roller Grills w/ Built-In Bun Drawer
Photo : 
Description : Star's unique roller grill features a built-in bun drawer saving space, reduces costs and provides sanitary storage of buns.
High impact graphics are standard for optional merchandising.
Unique stadium seating slanted roller design providing the best presentation of your products increasing sales and impulse purchases.
Reliable infinant control for percise temperature control. Two controls are provided for cook & hold capabilities.
For additional information on this item, please contact George or Mary at (709) 728-1489 or email nfldfood@nl.rogers.com
Name : Star Manufacturing Hot Dog Steamers
Photo : 
Description : Star's "Classic" Hot Dog Steamer features top loading lid design for easy access to you hot dogs, buns and more.
Side by side design provides more control of heat and humidity to satisfy all your steaming needs.
Bun compartment features a humidity control system and a bun rack to keep buns warm and fresh.
Adjustable thermostat ensures quick start up and fast recovery for peak operating times.,
Full view tempered glass on both the operator's and customer's side for excellent merchandising.
Call George at 709-728-1489 or email nfldfood@nl.rogers.com
Name : Star Manufacturing Soup Kettles
Photo : 
Description : The body has the "cast" look without that "cast" weight.
Constructed from spun aluminum and a special paint application, the body will keep its new appearance for years.
The spun aluminum heat well provides excellent heat transfer and is gold anodized to prevent corrosion and make for easy cleaning.
For additional information on this item, please contact George or Mary at (709) 728-1489 or email nfldfood@nl.rogers.com
Name : Omcan Meat Slicer
Photo : 
Description : Our slicers have anodised aluminium alloy bodies. The high carbon steel blades are hard chromed, with a hollow ground taper for extended sharpening and blade life. These belt driven machines offer exceptional cutting consistency and durability. The carriage moves smoothly on ball bearings allowing effortless cutting of deli meats and vegetables. Easy to disassemble for quick cleaning. Perfect for low volume operations. The 300F slicers offer a slightly larger body size and motor than the 300E.
MODEL - 300F
BLADE SIZE - 12"/300 mm
HORSEPOWER - .50 HP
RPM - 280
ELECTRICAL - 110V/60/1
WEIGHT - 79.3 LBS.
DIMENSION (LWH) - 30.25" x 21.25" x 18"
For additional information on this item (as well as this item in different series models), please contact George or Mary at (709) 728-1489 or email nfldfood@nl.rogers.com
Name : Dayon Bread Slicer
Photo : 
Description : Our bread slicer SM302 is your best buy for slicing up to 240 loaves per hour. Very compact, it comes with a standard packing shelf on top and a loaf pusher. Loaves are fed through the slicer by a weight assisted gravity chute. For all kinds of breads and sizes.
FEATURING
Table model
Blade holder: 15" wide
Loaf up to 5" high
Capacity: Up to 240 loaves/hour
Slices: standard 5/8", optional 3/4" thick or 1/2"
Blades required: 28 blades fixed individually under balanced tension
Gravity infeed chute: 22" long
Motor: 1/4 HP
Single phase: 120V - 6A - 60 Hz
EXTERIOR DIMENSIONS
· Width: 27 1/2"
· Height: 32 1/2"
· Depth: 27 1/2"
For additional information on this item (as well as this item in different series models), please contact George or Mary at (709) 728-1489 or email nfldfood@nl.rogers.com
Name : Toastmaster 4 Slice Toaster
Photo : 
Description : Toastmaster Model TP-430 Four slice toaster, 208 Volt, Single Phase Call George at 709-728-1489 or email nfldfood@nl.rogers.com
;)
;)
;)
;)
;)
;)
;)
;)
;)